Brass Tubular Drain Fittings Center Outlet Wastes

Center Outlet Wastes

These sets are used to hook up a sink with 2 outlets that drains from the middle.

Brass Tubular Drain Fittings Compression Rings
Compression Rings

1-1/4 and 1-1/2 inch compression rings.

Brass Tubular Drain Fittings Connectors
Connectors

Connectors make a transition from tubular drain to male or female pipe thread.

Brass Tubular Drain Fittings Couplings
Couplings

Coupling have slip fittings on both ends.

Brass Tubular Drain Fittings for Disposal
Disposal

Many items to help you hook-up your disposal. 

Brass Tubular Drain Fittings Elbows
Elbows

45 and 90 degree bends for tubular drain.

Brass Tubular Drain Fittings End Outlet Wastes
End Outlet Wastes

These sets are used to hook up a sink with 2 outlets that drains from the middle.

Brass Tubular Drain Fittings J-Bends
J-Bends

J-Bend Traps of many different sizes can be found in this drawer

Brass Tubular Drain Fittings Offset Connectors
Offset Connectors

Off Set Connectors are used to make a 45 degree change of direction in the drain line.

Brass Tubular Drain Fittings P-Traps
P-Traps

1-1/4 and 1-1/2 Inch P-Traps

Brass Tubular Drain Fittings Slip Joint Extensions
Slip Joint Extensions

1-1/4 and 1-1/2 Inch Slip Joint extensions are used if you need to make the drain tube longer.  With a washer it make the seal.

Brass Tubular Drain Fittings Solder Extensions
Solder Extensions

Break out your Propane Torch for these old style solder on connections.  Used to make a permanent connection.

Brass Tubular Drain Fittings Stand Pipes
Stand Pipes

If you need to add a stand pipe to your washing machine drain they are in this drawer.  Used to increase the height of the drain inlet.

Brass Tubular Drain Fittings S-Traps
S-Traps

1-1/4 and 1-1/2 Inch S-Traps.  Used for through the floor type drain systems.

Brass Tubular Drain Fittings Tail Pieces
Tail Pieces

Tail Pieces 1-1/4 and 1-1/2 Inch for making extensions

Brass Tubular Drain Fittings Tees
Tees

To make a 3 way connections in a drain system.

Brass Tubular Drain Fittings Threaded Tail Piece Extensions
Threaded Tail Pieces Extensions

Threaded Tail Pieces 1-1/4 and 1-1/2 Inch for making extensions

Brass Tubular Drain Fittings Wall Tubes
Wall Tubes

Wall tubes go on a trap.

Brass Tubular Drain Fittings Waste Elbows
Waste Elbows

Waste Elbows are the tubed elbows for end outlet and center outlet waste.
 

Brass Tubular Drain Fittings Decorative Trim

Decorative Trim

17 different colosrs of trim to choose from.